Plant protection drone flight operations need to pay attention to these problems

At present, plant protection drones have become important mechanical equipment in agricultural production. However, some flying hands are currently operating irregularly in the process of using plant protection drones, so the flying hands are operating plant protection drones. Pay attention to the following issues during the operation.

Operational problem: As a qualified drone plant protection flying hand, you need to have skilled operation technology and master a wealth of theoretical knowledge. The more thorough and precise the master's theoretical knowledge is, the more it will be in the specific flight operation. Confident, even if you encounter a problem during the flight, you can even identify the dredge. Some of them are the biggest threat to current flight safety due to the lack of common sense and short-term negligence of flying hands. Sometimes there is even a problem that the installed screws are tight and the drone is falling apart. And the plant protection drones must concentrate on the flight, do not be half-hearted, and must strictly follow the prescribed operations during the flight, do not try unpredictable actions, and can not take it for granted to create flight instructions to avoid the bomber.
Battery problem; the battery of the plant protection drone must confirm the battery voltage before use, and the new battery should avoid using high current charging during use, and pay attention to the battery temperature during use to avoid over-discharge, so that To ensure the battery life, it can also avoid battery burning problems caused by improper use. If the battery is not used for a long time, put the battery in a dry and dry place, and the temperature is preferably 0-40 °C, and the battery should be fully charged and discharged once a month. Check the voltage of the battery cell at a time.
Pesticide problem: Water must be used when dispensing the plant protection drone, so as to prevent the drug residue from clogging the spray pipe. In the case of charging a drone, it is necessary to align the charge port or the lead pipe to introduce the drug, and to avoid the corrosion of the battery and the motor caused by the splash of the drug. When using the medicine, pay attention to wearing safety protective equipment, avoid direct contact with the human body, and if the residue is clogged, it should be cleaned up in time before continuing to use. When spraying pesticides, try to avoid rivers and drinking water sources to avoid water pollution problems, and after spraying pesticides, timely clean the plant protection drones and other equipment to avoid residual pesticide corrosion equipment and appliances.
Flight problem: When using the drone below 2000 meters above sea level, keep away from the crowd and fly to the open space. Plant protection flight should try to choose plant protection in the environment with good temperature of 0-40 °C, avoiding wind and rain. Flying under snow conditions. In the course of the flight process, it is necessary to avoid obstacles such as crowds, trees, wires, airports, tall buildings and signal towers. It is forbidden to hover over the seedlings during the plant protection process to avoid damage to the seedlings.
In short, the plant protection flying hand must pay attention to the above problems during the flight operation, safe operation and flight. Henan Xianglong Airlines is a professional drone driver/captain training institution authorized by the Civil Aviation Administration of China and approved by the China AOPA Association. It has trained a large number of flight operations personnel for the fire protection, plant protection, surveying, power, film and television industries. Training hotline: 17862854001. Http://www.hn-xlhk. com